Material Safety Data Sheet
APPENDIX C - MATERIAL SAFETY DATA SHEET
PRODUCT ProtectorGlaze™
--------------------------------------------------------------------
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION
PRODUCT NAME: ProtectorGlaze™ PEELABLE COATING
SUPPLIER: Protectall International Ltd.
--------------------------------------------------------------------
2. COMPOSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------
3. HAZARDS IDENTIFICATION
Not regarded as a health or environmental hazard under current legislation.
--------------------------------------------------------------------
4. FIRST AID MEASURES
- SKIN CONTACT: Frequent or prolonged skin contact may irritate skin.
- EYE CONTACT: Slightly irritating but does not injure eye tissue.
- INHALATION: Vapours may be irritating to respiratory system and nasal passages.
- INGESTION: Low toxicity. No hazard with normal use.
- CHRONIC: None known.
--------------------------------------------------------------------
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
This product is non flammable. Use fire-extinguishing media appropriate for surrounding
materials.
--------------------------------------------------------------------
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet.
ENVIRONMENTAL PRECAUTIONS
Do not allow to enter drains, sewers or watercourses. Contain spillages with sand, earth or any
suitable absorbent material. Transfer liquid to containers, if possible, for recovery or disposal.
SPILL CLEAN UP METHODS
Flush away spillage with plenty of water. Spill emulsion very slippery. Avoid falls.
--------------------------------------------------------------------
7. HANDLING AND STORAGE
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact. Do not use in confined spaces without adequate ventilation and/or respirator.
STORAGE PRECAUTIONS
Keep containers tightly closed. Keep in original container. Keep away from food, drink and animal feeding stuffs. Store above freezing. Minimise contact with air to prevent bacterial growth.
STORAGE CLASS
Chemical storage.
--------------------------------------------------------------------
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
PROTECTIVE EQUIPMENT
- Approved goggles.
- Approved gloves.
ENGINEERING MEASURES
Provide adequate general and local ventilation.
RESPIRATORY EQUIPMENT
Respiratory equipment may be required.
HAND PROTECTION
Wear protective gloves.
EYE PROTECTION
Wear approved safety goggles.
OTHER PROTECTION
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
HYGIENE MEASURES
Wash at the end of every work shift and before eating, smoking and using the toilet. Wash promptly if skin becomes wet or contaminated.
Promptly remove any clothing that becomes wet. When using do not eat, drink or smoke.
--------------------------------------------------------------------
9. PHYSICAL AND CHEMICAL PROPERTIES
- APPEARANCE: Viscous liquid
- COLOUR: White
- ODOUR: Mild odour
- RELATIVE DENSITY: 1.07
- VISCOSITY: FORD CUP 4 80-120 s 20deg C
- FLASH POINT (DEG C): Non Flammable
- EXTINGUISHING MEDIA: Non Flammable
- FIRE FIGHTING PROCEDURES: This product is non flammable and does not cause hazard.
--------------------------------------------------------------------
10. STABILITY AND REACTIVITY
STABILITY
Stable under normal temperature conditions and recommended use.
--------------------------------------------------------------------
11. TOXICOLOGICAL INFORMATION
- INHALATION:
May cause irritation to the respiratory system.
- INGESTION:
May cause discomfort if swallowed.
- SKIN CONTACT:
Liquid may irritate skin.
- EYE CONTACT:
Splashes may irritate.
--------------------------------------------------------------------
12. ECOLOCICAL INFORMATION
EXOTOXICITY
The product components are not classified as environmentally hazardous. However, this does not Exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
--------------------------------------------------------------------
13. DISPOSAL CONSIDERATIONS
GENERAL INFORMATION
The dried ProtectorGlaze™ can be disposed of in a landfill and will decompose over a period of time, and does not contaminate the environment.
--------------------------------------------------------------------
14. TRANSPORT INFORMATION
- GENERAL:
The product is not covered by international regulation on the transport of dangerous goods
(IMDG, IATA, ADR, RID)
- PROPER SHIPPING NAME:
Non required
- ROAD TRANSPORT NOTES:
Not classified
- SEA TRANSPORT NOTES:
Not classified
- AIR TRANSPORT NOTES:
Not classified
- UN NO. ROAD:
0
--------------------------------------------------------------------
15. REGULATORY INFORMATION
RISK PHRASES
Not classified.
SAFETY PHRASES
Not classified.
UK REGULATORY REFERENCES
Chemicals (Hazard Information and Packaging) Regulations.
APPROVED CODE OF PRACTICE
Classification and Labelling of Substances and Preparations Dangerous for Supply. Safety Data Sheets for Substances and Preparations.
GUIDANCE NOTES
Occupational Exposure Limits EH40
--------------------------------------------------------------------
16. OTHER INFORMATION
REVISION DATE MARCH 2005
|
