ProtectorGlaze™ is

A Temporary Protective, Water Resistant Peelable Coating For Windows and Other Surfaces:

Colour: Clear

ProtectorGlaze™ is a Peelable coating formulated for use on windows that require temporary protection from other building trades. Apply ProtectorGlaze™ by roller.

The excellent shielding of ProtectorGlaze™ hides inside activities from outside view. The coating is transparent in colour that will allow natural diffused light into the building. When inside redecoration is finished, remove ProtectorGlaze™ by peeling, leaving the inside showroom window in sparkling clean condition.

ProtectorGlaze™ represents the ultimate in non-solvent, water borne, strippable coatings.

ProtectorGlaze™ contains no flammable solvents.

Advantages:

Safe to use. Clear dry film.
Water resistant when dry. Water cleanable when wet.
Excellent hiding / shielding. Easy to use.
Non-flammable.
Creates one tenth of the volume of waste that conventional protective films create.

Application:

ProtectorGlaze™ is normally used as received. It can be applied by, roller, or brush. The coating dries, depending on humidity and film thickness, in 30 minutes to 4 hours. ProtectorGlaze™ should be applied to yield a dry film of two to six mils (.002" to .006") thick. The dry coating is resistant to attack by water and can be washed, if so desired. Application temperatures range from 15F. to 48º Celsius.. ProtectorGlaze™ dries upon water evaporation. Faster dry can be realized by simple placement of air fans to remove the water from the coating. Rollers can be cleaned with water immediately after film application.

Removal:

ProtectorGlaze™ is removed by peeling. Simply, pry a piece of coating in one corner and lift.

Flammability:

Water Resistant ProtectorGlaze™ presents no fire hazard as received, during, or after application.

Disposal:

ProtectorGlaze™ is formulated to exclude ingredients that are deleterious to the painting process, such as silicones, or to the water wash system, such as foam generating or foam stabilizing ingredients.

FIRST TIME APPLICATION:

Cleaning of equipment:

Wet coating is easy to remove. Dry coating is water resistant and washing equipment with solvents might be necessary. Prolong soak in water will help coating removal easier.